Please review these other products:
|Crossfire Dual Tire Pressure Equalizer, 80 psi
MFG: Dual Dynamics
Product Code: 54749
Email this page
- Leak Safeguard Will Not Allow One Leaking Tire to Drain the Other
inner tire temperature increases due to in-board brakes and poor air
circulation causing increased air pressure that expands the inner
tires’ diameter. As a result, the diameters of the dual tires are
unequal. The Crossfire keeps the psi equal. Yellow indicator verifies
air is flowing freely from one tire to the other, equalizing the load.
Visual gauge window shows black if the tires are under-inflated and red
if over-inflated. Crossfire automatically isolates the "good" tire in
the event of a blowout. Should a blowout occur, the internal safety
valve closes immediately with only a slight loss of pressure to the
"good" tire. In slow leak situations, the valve isolates both tires
after a pressure drop of approximately 10 P.S.I. Bolts easily to the
lug, hub cap, or drive axle end. Sold Each. Need 2 per axle.
- Single-Point Inflation and Visual Pressure Gauge Cuts Maintenance Time
Includes 4 mounting brackets:
Bracket A: Mounts on the 5/8" or 3/4" drive axle bolts of disc and spoke wheels. If the wheel has a hub cap, it can be snapped on over the bracket.
Bracket B: Mounts on the 1-1/4" lug bolt.
Bracket T: Mounts on the 1/4" bolt that secures the hub cap to either a disc or spoke wheel.
Bracket H: Mounts on lug with a hub-piloted nut.Bracket M: Fits a 22 mm stud.
Additional Mounting Brackets available. Specify on order if required.
Bracket C: Mounts on the 5/8" or 3/4" drive axle bolts of both disc and spoke wheels.
Bracket M: Fits a 22mm Stud