Myers #21604 - 1 MX-Sensor with Snap-in-Valve
Myers #21605 - 4 Clamp-in-Valves for 21604

Combines both 315 MHz and 433 MHz applications in one sensor

100% ID cloneable with no relearn required - when the MX-Sensor is cloned with the original sensor ID and put in the same position
98% vehicle coverage - sensor updates during installation from the AUTEL® wireless programming tool which gives the sensor the latest and most comprehensive vehicle coverage
1-Sensor to service nearly every TPMS equipped vehicle means lower repair cost and higher install efficiency.
Maximum sensor signal strength - allows AUTEL® sensor to be easily programmed wirelessly even when the sensors have already been mounted to the wheel
Lightweight - 12 g sensor weight makes it significantly lighter than most sensors in the market, which ensures better sensor stability and performance
AUTEL® quality control – each sensor is marked with a series number to track the sensor quality from the factory to ensure only the highest quality parts are installed

The Next Generation TPMS Service Tool

Choose from two TPMS service modes based on service type needed.
The option to choose a TPMS diagnostic mode will decrease repair time.

Introduction

Update Instruction

MX-Sensor Programming

Causes and Resolutions for TPMS MIL ON

TPMS Relearn Function

A Complete TPMS, Diagnostic and Service Tool

Read/clear codes for all module systems such as powertrain, body chassis and communication
Supports all 10 OBDII test modes- freeze frame, enhanced mode 6, I/M readiness, vehicle information and component tests
Open and close EPB pads for service
Diagnose EPB/SBC Caliper functionality

Wireless OBDII connection to read and clear codes
Detects and displays TPMS system faults
Activates and relearns all known sensors
Reads tire pressure, sensor ID information and battery level of sensor
On-tool relearn procedure; widest OBD relearn coverage • Displays relearn procedures
Tire pressure placard value change
Programs the AUTEL® MX sensor