AUTEL TPMS Sensors and Service Tool Kit


21602Kit-side.jpgFor a limited time only, Myers is offering an introductory Autel offer.

Myers No. 21602KIT
The kit includes the following:
  • (20) - MX - Sensors (#21604)
  • (4) - Metal valves (#21605)
  • Plus the AUTEL® TS508 TPMS Tool with OBDII and lifetime software updates


TS608-side-image.jpgProgrammable Universal TPMS Sensor

Myers #21604 - 1 MX-Sensor with Snap-in-Valve
Myers #21605 - 4 Clamp-in-Valves for 21604

Combines both 315 MHz and 433 MHz applications in one sensor

  • 100% ID cloneable with no relearn required - when the MX-Sensor is cloned with the original sensor ID and put in the same position
  • 98% vehicle coverage - sensor updates during installation from the AUTEL® wireless programming tool which gives the sensor the latest and most comprehensive vehicle coverage
  • 1-Sensor to service nearly every TPMS equipped vehicle means lower repair cost and higher install efficiency.
  • Maximum sensor signal strength - allows AUTEL® sensor to be easily programmed wirelessly even when the sensors have already been mounted to the wheel
  • Lightweight - 12 g sensor weight makes it significantly lighter than most sensors in the market, which ensures better sensor stability and performance
  • AUTEL® quality control  – each sensor is marked with a series number to track the sensor quality from the factory to ensure only the highest quality parts are installed


The Next Generation TPMS Service Tool

Myers #21602

Choose from two TPMS service modes based on service type needed.
The option to choose a TPMS diagnostic mode will decrease repair time.

TS608-side-image.jpgQuick Mode

  • Activate all known sensors
  • Read sensor ID, temperature and pressure
  • Read battery power level condition

Advanced Mode

  • Activate all known sensors
  • Read sensor ID, temperature, pressure & battery condition
  • TPMS status screen – view system faults
  • Read and clear DTC’s from ECU
  • On-tool relearn procedure
  • Widest OBD relearn vehicle coverage
  • Tire pressure placard value change